V Office 2, VO2-03-12,
Lingkaran SV, Sunway Velocity, Jalan Peel,
55100 Kuala Lumpur,
Malaysia.
+603-2742 7468
- CO / CO2 / Light / Sound
- Cooking Oil Tester
- Data Loggers / Monitoring System
- Electrical Measurement
- Emission / Flue Gas Analyzer
- External Probes
- Humidity / Moisture
- pH Measuring Instruments
- Pressure / Air Flow / Manifolds / Gas Detectors
- Tachometer / Stroboscope
- Temperature
- Thermal Imager
- Accessories
Muser Apac Sdn Bhd
V Office 2, VO2-03-12,
Lingkaran SV, Sunway Velocity, Jalan Peel,
55100 Kuala Lumpur,
Malaysia.
V Office 2, VO2-03-12,
Lingkaran SV, Sunway Velocity, Jalan Peel,
55100 Kuala Lumpur,
Malaysia.
Testo 830-T2 - Infrared Thermometer [Delivery: 3-5 days]
| Previous | 16 / 17 | Next |
testo 830-T2 - Infrared Thermometer
(NOT FOR HUMAN TEMPERATURE / MEDICAL USE)
(NOT FOR HUMAN TEMPERATURE / MEDICAL USE)
- Infrared thermometer for non-contact surface temperature measurements
- 12:1 optics and high resolution processor for accurate measurement results
- Contact measurement possible with connectable temperature probe (TC type K)
- Adjustable emission level
Product Description
The testo 830-T2 IR thermometer with laser measurement spot marker and 12:1 optics is suitable for non-contact surface temperature measurements in trade and industry.
Overview of the advantages offered by the testo 830-T2 infrared thermometer
With the testo 830-T2 infrared thermometer, non-contact measurement of surface temperature is accurate and fast (2 measurements per second). To summarise, the IR thermometer offers the following advantages:
- High resolution processor for utmost accuracy (resolution 0.1 °C)
- 12:1 optics for precise measurements even at medium distances
- IR thermometer with 2-point laser measurement spot marker to target the measuring point
- Two alarm limit values that can be defined as required
- Visual and acoustic alarm if limit value exceeded
- Min./max. value display and hold function (to record a measured value)
- Convenient one-handed operation thanks to the ergonomic gun-style design
- Clear, illuminated digital display
- External probe connection for thermocouple temperature probes TC type K
In addition to infrared measurement, the testo 830-T2 IR thermometer also offers the option of carrying out a contact measurement. Simply connect an optionally available TC type K temperature probe to the infrared measuring instrument. Testo offers a large selection of probes: e.g. a fast-action surface probe with sprung thermocouple strip, but also air probes or immersion/penetration probes (for liquids and pastes).
The infrared thermometer emission level can be individually set. This allows you to adjust it precisely to the material of the surface being measured to achieve the best possible measurement results. For untreated surfaces with a low emission level, we recommend using an emission tape (optional) which makes the IR measurement significantly easier.
Delivery Scope
Testo 830-T2 infrared thermometer, including batteries and factory calibration certificate.
Technical Data
| Temperature - TC Type K (NiCr-Ni) | |
|---|---|
| Measuring range | -50 to +500 °C |
| Accuracy | ±0.5 °C + 0.5 % of mv |
| Resolution | 0.1 °C |
| Measuring rate | 1.75 s |
| Temperature - Infrared | |
|---|---|
| Measuring range | -30 to +400 °C |
| Accuracy |
±1.5 °C or ±1.5 % of mv (+0.1 to +400 °C) ±2 °C or ±2 % of mv (-30 to 0 °C) (the higher value applies) |
| Measuring rate | 0.5 s |
| Infrared resolution | 0.1 °C |
| General technical data | |
|---|---|
| Dimensions | 190 x 75 x 38 mm |
| Operating temperature | -20 to +50 °C |
| Housing | ABS |
| Warranty | 2 years |
| Battery type | 9V block battery |
| Battery life | 15 h |
| Storage temperature | -40 to +70 °C |
| Weight | 200 g |
Downloads
Product Brochures
Product brochure testo 830 (PDF, 1.3 MB)
Manuals
Instruction manual testo 830 T1 - T2 (PDF, 437.7 kB)