V Office 2, VO2-03-12,
Lingkaran SV, Sunway Velocity, Jalan Peel,
55100 Kuala Lumpur,
Malaysia.
+603-2742 7468
- CO / CO2 / Light / Sound
- Cooking Oil Tester
- Data Loggers / Monitoring System
- Electrical Measurement
- Emission / Flue Gas Analyzer
- External Probes
- Humidity / Moisture
- pH Measuring Instruments
- Pressure / Air Flow / Manifolds / Gas Detectors
- Tachometer / Stroboscope
- Temperature
- Thermal Imager
- Accessories
Muser Apac Sdn Bhd
V Office 2, VO2-03-12,
Lingkaran SV, Sunway Velocity, Jalan Peel,
55100 Kuala Lumpur,
Malaysia.
V Office 2, VO2-03-12,
Lingkaran SV, Sunway Velocity, Jalan Peel,
55100 Kuala Lumpur,
Malaysia.
Testo 176 T4 - Temperature Data Logger [Delivery: 3-5 days subject to availability]
| Previous | 19 / 23 | Next |
testo 176 T4 - Temperature Data Logger
- Super size memory for up to 2 million readings, up to 8 years battery life
- For measuring and logging the temperature at four different sites simultaneously
- Extremely wide measuring range from -200 °C – 1 000 °C
- Carry out data analysis on your PC: three software options to choose from; Basic software as free download
This meter uses a sensor to start up.
Product Description
The testo 176 T4 temperature data logger can tell you at a glance if the temperature of the room or facility is within the prescribed thresholds. It can measure the temperature at up to four different sites simultaneously and has a super size memory that can save up to 2 000 000 readings. This gives you the freedom to read out the logger data at longer intervals, even when measuring cycles are shorter.
You will need at least one temperature sensor to use your logger. There is a wide selection of thermocouple sensors ranging from type K, T or J sensors to air, surface or probe sensors available.
Technical features and benefits in the field
The logger’s display provides you with a wide range of valuable information including current measurement values, threshold values, points where these thresholds have been exceeded, min/max values as well as the remaining battery power. And because all these values can be read off directly from the display, there is no need for you to boot up your PC. In addition to this nice little detail, the logger also has a super size memory and an exceptionally long battery life of up to 8 years. This gives you the freedom to read out the logger data at longer intervals, even when measuring cycles are shorter.
The testo 176 T4 data logger is IP 65 protected and can therefore also be used in dusty and dirty work environments. The standard AA batteries can be replaced by the user.
Possible areas of application
- Checking the temperature in ultra-low temperature freezers or under cryo conditions
- Measuring and logging flow and return temperatures at underfloor heating distributors in order to check that they are working properly
- Checking process temperatures
- Checking flow and return temperatures of heating systems
Programming and analyzing your data logger
Choose one of three software versions to program or read out your logger or to analyze the measuring data you have obtained on your PC:
- Software ComSoft Basic – available for free downloading – allows you to program your logger and analyze the data quickly and easily
- Software ComSoft Professional – optional – provides you with additional possibilities and a more detailed analysis of the temperature values
- Software ComSoft CFR 21 Part 11 – optional – ideal for the special demands of the pharmaceutical sector in compliance with 21 CFR Part 11
Delivery Scope
testo 176 T4 temperature data logger with external sensor ports (TC type T, K and J), wall mount, lock, battery, calibration certificate.
Technical Data
| Temperature - TC Type K (NiCr-Ni) | |
|---|---|
| Measuring range | -195 to +1000 °C |
| Accuracy |
±1 % of mv (-195 to -100.1 °C) ±0.3 °C (-100 to +70 °C) ±0.5 % of mv (+70.1 to +1000 °C) |
| Resolution | 0.1 °C |
| Temperature - TC Type T (Cu-CuNi) | |
|---|---|
| Measuring range | -200 to +400 °C |
| Accuracy |
±1 % of mv (-200 to -100.1 °C) ±0.3 °C (-100 to +70 °C) ±0.5 % of mv (+70.1 to +400 °C) |
| Resolution | 0.1 °C |
| Temperature - TC Type J (Fe-CuNi) | |
|---|---|
| Measuring range | -100 to +750 °C |
| Accuracy |
±0.3 °C (-100 to +70 °C) ±0.5 % of mv (+70.1 to +750 °C) |
| Resolution | 0.1 °C |
| General technical data | |
|---|---|
| Dimensions | 103 x 63 x 33 mm |
| Operating temperature | -20 to +70 °C |
| Protection class | IP65 |
| Channels | 4 external |
| Warranty | 2 years |
| Battery type | 1 x Lithium (TL-5903) |
| Battery life | 8 years at 15 min. meas. rate |
| Memory | 2,000,000 measuring values |
| Storage temperature | -40 to +85 °C |
Applications
Checking the temperature in super freezers or under cryogenic conditions
Specific products must be stored under extremely cold conditions so as to ensure their quality. Therefore, in many laboratories and research facilities you can for instance find super freezers which can be cooled down to -80 °C using liquid nitrogen or dry ice.
In many cases storage under cryogenic conditions is even required. So, particular biological or blood products are for example stored and transported at -196 °C. Special measuring instruments, which are also fit for purpose at such low temperatures, are needed to check these extreme conditions.
Monitoring process temperatures
For production quality assurance, the temperature must frequently be checked at various points in production processes. Whether it is the air temperature, the temperature of production items themselves or the surface temperature of machines or motors.
Using thermocouple probes, data loggers can also record data in the kinds of extreme temperature ranges that are often to be found in production processes. The probe's fast speed of response contributes here to a good measurement result being achieved even in processes where temperatures change quickly.
Checking the flow and return temperature of heating systems
The heating period starts in autumn and with it the time for tenants to complain that the apartment cannot be heated to the extent they want as well. Using flexible external pipe wrap probes, you can for instance check the flow and return temperature of individual heaters in a targeted way, so as to identify causes and remedy them.
Downloads
Product Brochures
Product brochure testo 176 T3 / testo 176 T4 (PDF, 670.6 kB)
Manuals
Instruction manual testo 176 (PDF, 2.8 MB)