V Office 2, VO2-03-12,
Lingkaran SV, Sunway Velocity, Jalan Peel,
55100 Kuala Lumpur,
Malaysia.
+603-2742 7468
- CO / CO2 / Light / Sound
- Cooking Oil Tester
- Data Loggers / Monitoring System
- Electrical Measurement
- Emission / Flue Gas Analyzer
- External Probes
- Humidity / Moisture
- pH Measuring Instruments
- Pressure / Air Flow / Manifolds / Gas Detectors
- Tachometer / Stroboscope
- Temperature
- Thermal Imager
- Accessories
Muser Apac Sdn Bhd
V Office 2, VO2-03-12,
Lingkaran SV, Sunway Velocity, Jalan Peel,
55100 Kuala Lumpur,
Malaysia.
V Office 2, VO2-03-12,
Lingkaran SV, Sunway Velocity, Jalan Peel,
55100 Kuala Lumpur,
Malaysia.
Testo 410-1 - Vane Anemometer [Delivery: 3-5 days]
| Previous | 21 / 28 | Next |
testo 410-1 - Vane Anemometer
- Vane anemometer with permanently installed 40 mm vane
- Measurement of air velocity and air temperature
- Calculates wind chill and the Beaufort wind force
- Practical: with single-point averaging, max/min and Hold function
Product Description
The testo 410-1 vane anemometer is impressive thanks to its practical pocket size and is ideal for fast check measurements. With a measuring range of 0.4 to 20 m/s, the anemometer can even be used for low flow speeds.
The anemometer has a permanently mounted vane with a diameter of 40 mm. You can therefore use it for the integral measurement of air velocity at ventilation grilles (air outlets).
The anemometer is practical for outdoor operation: as well as air velocity and air temperature, the testo 410-1 also calculates the Beaufort wind force and the wind chill temperature, which is the temperature perceived by a person due to wind-related cooling.
The vane anemometer with practical functions
The testo 410-1 includes a plug-on protective cap, as well as a wrist strap for secure measurement, and enables you to take advantage of the following functions:
- Single-point averaging: provides information on the average air velocity, e.g. at air outlets
- Hold function: is used to record the current values relating to air velocity and air temperature and compare them with each other
- Max/min values: get the minimum or maximum values since the anemometer was last switched on or reset, at the touch of a button
- Illuminated display: read off your readings even in dark environments
- Selectable units: for air velocity and temperature: m/s, km/h, fpm, mph, kts, Beaufort, °C, °F and wind chill
Delivery Scope
testo 410-1 vane anemometer for measuring air velocity and air temperature, including protective cap, wrist strap, calibration protocol and batteries.
Technical Data
| Temperature - NTC | |
|---|---|
| Measuring range | -10 to +50 °C |
| Accuracy | ±0.5 °C |
| Resolution | 0.1 °C |
| Measuring rate | 0.5 s |
| Velocity - Vane anemometer | |
|---|---|
| Measuring range | 0.4 to 20 m/s |
| Accuracy | ±(0.2 m/s + 2 % of mv) |
| Resolution | 0.1 m/s |
| General technical data | |
|---|---|
| Dimensions | 133 x 46 x 25 mm (incl. protective cap) |
| Operating temperature | -10 to +50 °C |
| Protection class | IP10 |
| Warranty | 2 years |
| Battery type | 2 AAA micro batteries |
| Battery life | 100 h (average, without display illumination) |
| Storage temperature | -20 to +70 °C |
| Weight | 110 g (with protective cap and batteries) |
Downloads
Product Brochures
Product brochure testo 410 (PDF, 248.9 kB)
Manuals
Instruction manual testo 410-1 (PDF, 242.1 kB)